- Description
-
Details
Refurbished CISCO NM-1T3-/E3 CISCO NM-1T3/E3 1 PORT T3/E3 MODULE. Save money off MSRP on this CISCO NM-1T3-/E3 and even more when buying in bulk. Contact us directly for bulk pricing on the NM-1T3-/E3.
This refurbished CISCO NM-1T3-/E3 is covered by the Core 4 Solutions 90 day warranty. We always attempt to ship your order same day, and will do the same on this CISCO NM-1T3-/E3. Guaranteed best price on the web - if you find the NM-1T3-/E3 for less, let us know and we will do our best to beat the price. Contact us directly for deeper discounts on the NM-1T3-/E3. info@core4solutions.com or 1-855-55-CORE4
General Information Manufacturer Cisco Systems, Inc Manufacturer Part Number NM-1T3/E3= Manufacturer Website Address http://www.cisco.com Brand Name Cisco Product Name Switching Module Marketing Information The Cisco T3/E3 Network Module provides high-speed WAN access for the Cisco 2600, 3600, and 3700 series routers. T3/E3 WAN access enables the network to carry high volumes of data and rich multimedia content, while providing low latency for voice over IP (VoIP).
Product Type Switching Module Technical Information Application/Usage Switching Network Interfaces/Ports Interfaces/Ports Details 1 x BNC Female T3/E3 Network Full-duplex WAN Media & Performance Media Type Supported Coaxial Network Technology T3/E3 Maximum Data Transfer Rate 44.74 Mbit/s Physical Characteristics Height 1.6" Width 7.1" Depth 7.2" Miscellaneous Additional Information - DSX3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)
- Scrambling and subrate support of major DSU vendors
- Line build-out - Programmable for up to 450 feet of 734A or equivalent coaxial cable or up to 225 feet for 728A or equivalent coaxial cable
- C-bit, or M23 framing for T3, bypass and G.751 framing for E3 (software selectable)
- Binary 3-zero substitution (B3ZS) (T3) or high-density bipolar with three zeros (HDB3) (E3) line coding
- Support for 16- and 32-bit CRC (16-bit default)
- DS3 FEAC channel support
- Twenty-four-hour history maintained for error statistics and failure counts
- DS3 alarm and event detection (once per second polling)
- Alarm indication signal (AIS)
- Out of frame (OOF)
- Line code violation (LCV)
- Excessive zeros (EXZ)
- Far-end receive failure (FERF)
- Line and payload loopback capabilities
- DS3 remote-line loopback (via Far End Alarm and Control [FEAC] codes per American National Standards Institute [ANSI] T1.107a)
- Response to embedded loopback commands
- Insertion of loopback commands into transmitted signal
- Programmable pseudorandom pattern up to 32 bits long, including 223, 220, 215, 1s, 0s, alt-0-1
- 32-bit error count and bit-count registers
- Alarm detection - Alarm indication signal (AIS), remote alarm, far-end block error (FEBE), out of frame (OOF)
- Onboard processor for Maintenance Data Link (MDL)
- Physical space savings - Eliminates the need for external DSU device, saving valuable rack space
- Software-configurable T3/E3 - Provides the flexibility to deploy a single module worldwide
Serial Encapsulations: - HDLC
- PPP
- Frame Relay
- ATM Data Exchange Interface (ATM-DXI)
Compatibility Supported Platforms & Minimum IOS Versions: - 3745 - 12.2(11)YT
- 3725 - 12.2(11)YT
- 3660 series - 12.2(11)YT
- 3640 - Not Available
- 3620 - Not Available
- 2691 - 12.2(11)YT
- 2650 - Not Available
- 2600XM Series - 12.2(11)YT
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available
- Specifications
-
Specifications
SKU cisco nm-1t3-/e3 refurbished Manufacturer CISCO Condition Refurbished Additional Part Numbers No EAN No Specification No Reviews No PDF Url No Image Gallery N/A - Reviews
-
Write Your Own Review
