BROCADE SFPP-SR 10GB SFP+ 850NM 300M *JU
Brand: BROCADE Part No.: SFPP-SR
$9.00
In stock (2 units), ready to be shipped
Price-matching available. If you find this item for a lower price, let us know.
Our Warranty
Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.
Description
The Brocade SFPP-SR is a 10 Gb/s SFP+ short-reach optical transceiver that runs at 850 nm over multimode fiber, with a reach of up to 300 meters. It plugs into SFP+ ports on Brocade switches and routers for 10 Gigabit Ethernet links within a data center, such as switch-to-switch uplinks or top-of-rack to server connections.
At a glance
- 10 Gb/s SFP+, 10GBASE-SR
- 850 nm, up to 300 m over multimode fiber
- Duplex LC connector, for Brocade SFP+ ports
- Refurbished, tested twice, 1-year advanced replacement warranty
Outfitting a whole switch or fabric?
If you need more SFPP-SR optics than we have listed, we can source additional quantities. A Core 4 sales engineer can also help with matching cables, other optics, and switches for your project. Talk to a sales engineer or call 1-855-55-CORE4.
Technical specifications
| Form factor | SFP+ (hot-pluggable) |
|---|---|
| Data rate | 10 Gb/s |
| Standard | 10GBASE-SR |
| Wavelength | 850 nm |
| Maximum reach | 300 m |
| Fiber type | Multimode |
| Connector | Duplex LC |
Compatibility
The SFPP-SR is Brocade's branded 10GBASE-SR optic for the SFP+ ports on Brocade Ethernet switching and routing platforms. Brocade equipment generally checks for Brocade-qualified optics, so a Brocade-branded module like this one is the straightforward choice for those ports.
On the fiber side it follows the 10GBASE-SR standard, so it links to any 10GBASE-SR optic at the far end, regardless of brand, over 850 nm multimode cabling.
Condition
This SFPP-SR is refurbished: a fully functioning optic, typically decommissioned from a working production network or sourced from overstock, returns, or off-lease equipment. The vast majority of these parts were never broken or repaired.
Core 4 tests every transceiver when it arrives and again before it ships, and anything that does not pass is repaired before it is sold. Because these optics have already been installed and run in service, early failures have been weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory.
It is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.
Common questions
What fiber do I need to reach 300 meters? The 300 m rating applies to OM3 laser-optimized multimode fiber. Older OM1 and OM2 multimode cabling supports much shorter distances at 10 Gb/s, so check the grade of your installed fiber for longer runs.
Can the other end of the link be a non-Brocade optic? Yes. 10GBASE-SR is an IEEE standard, so the SFPP-SR links to any 10GBASE-SR transceiver on the far end, as long as both ends use 850 nm multimode fiber. Brand matching matters only for the port the optic plugs into.
What patch cables does it use? It takes a duplex LC multimode patch cable, one fiber for transmit and one for receive. Use cables that match your multimode fiber grade, such as OM3 or OM4.
Will it connect to a 1 Gb/s SX port? No. This is a 10 Gb/s optic and does not link with 1000BASE-SX transceivers. For a 1 Gb/s fiber link, use a 1000BASE-SX SFP on both ends.
Specifications
- Condition
- Refurbished
- Brand
- BROCADE
- Part No.
- SFPP-SR
- Weight
- 1.0 lb