Skip to content
Refurbished

HITACHI HUC156030CSS200 300GB 15K 2.5in SAS 12GBPS HDD

Brand: HITACHI Part No.: HUC156030CSS200

$16.95

In stock (4 units), ready to be shipped

Price-matching available. If you find this item for a lower price, let us know.

Our Warranty

Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.

Description

The Hitachi HUC156030CSS200 is a 300GB, 15,000 RPM hard drive in a 2.5-inch (SFF) form factor with a 12Gb/s SAS interface. It sits in the performance tier of spinning storage, for servers and arrays that need fast random access and low latency rather than bulk capacity.

At a glance

  • 300GB, 15K RPM hard drive
  • 12Gb/s SAS interface, 2.5-inch SFF
  • Fits 2.5-inch SAS bays, backward compatible with 6Gb/s SAS
  • Refurbished, tested twice, 1-year advanced replacement warranty

Need more than one drive for your array?

If you are filling a server or rebuilding a RAID set, we can source additional quantities of 15K SAS drives. Tell a Core 4 sales engineer what you are working on. Talk to a sales engineer or call 1-855-55-CORE4.

Technical specifications

Capacity 300GB
Spindle speed 15,000 RPM (15K)
Interface SAS
Link speed 12Gb/s
Form factor 2.5-inch (SFF)
Drive type Hard disk drive (HDD)

Compatibility

The HUC156030CSS200 installs in 2.5-inch SAS drive bays connected to a SAS controller or HBA. SAS 12Gb/s drives are backward compatible with 6Gb/s SAS controllers and backplanes, where they run at the slower link speed. As a SAS drive, it does not work on SATA-only ports.

Servers from HPE, Dell, Lenovo, and other OEMs mount drives in their own hot-plug carriers, so plan for the tray your chassis uses.

Condition

This Hitachi HUC156030CSS200 is refurbished: a fully functioning drive sourced from decommissioned production environments, overstock, returns, or off-lease equipment. The vast majority of these parts were never broken or repaired.

Core 4 tests every drive when it arrives and again before it ships, and anything that does not pass is repaired before it is sold. Because these drives have already been installed and burned in, early failures are weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory.

The drive is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.

Common questions

What workloads is a 15K RPM 300GB drive suited for? 15K drives offer the fastest seek times and highest random I/O of any spinning disk, which suits transactional databases, boot and OS volumes, log volumes, and RAID sets where latency matters more than raw capacity.

Will this 12Gb/s SAS drive work on a 6Gb/s SAS controller? Yes. SAS is backward compatible, so the drive negotiates down to 6Gb/s on an older controller or backplane. Spinning-disk throughput rarely saturates a 6Gb/s link, so the practical difference is small.

Can I install this 2.5-inch drive in a 3.5-inch bay? Only with a 2.5-to-3.5-inch adapter or a carrier designed to hold SFF drives in an LFF bay. Otherwise it goes in a native 2.5-inch SFF bay.

Can I mix this drive with other 300GB 15K SAS drives in a RAID array? Generally yes, as long as the drives match in capacity, interface, and spindle speed. Matching models in an array keeps rebuild behavior and performance consistent.

Specifications

Condition
Refurbished
Brand
HITACHI
Part No.
HUC156030CSS200
Weight
2.0 lb

Cart

Your cart is empty

Continue shopping