HP 507119-004 300GB 6G 10K SFF DP SAS 616671-001, 597609-001
Brand: HP Part No.: 507119-004 Substitute part numbers: 616671-001, 597609-001, 619286-001, 693569-001
$12.95
In stock (2 units), ready to be shipped
Price-matching available. If you find this item for a lower price, let us know.
Our Warranty
Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.
Description
The HP 507119-004 is a 300GB 2.5-inch (SFF) SAS hard drive that spins at 10,000 RPM and connects over a 6Gb/s dual-port SAS interface. It suits HP ProLiant servers and storage that need fast, redundant-path spinning storage for boot volumes, databases, and general server workloads. It is also listed under substitute part numbers 616671-001, 597609-001, 619286-001, and 693569-001.
At a glance
- 300GB, 10K RPM hard drive
- 6Gb/s dual-port SAS interface
- 2.5-inch SFF form factor
- Refurbished and tested, with a 1-year advanced replacement warranty
Filling a full array of 300GB 10K SAS drives?
If you need more of these drives than we have listed, or you are standardizing a fleet of ProLiant servers, our sales engineers can source additional quantities and matching spares. Talk to a sales engineer or call 1-855-55-CORE4.
Technical specifications
| Capacity | 300GB |
|---|---|
| Drive type | Hard disk drive (HDD) |
| Interface | SAS, 6Gb/s |
| Port configuration | Dual-port (DP) |
| Spindle speed | 10,000 RPM (10K) |
| Form factor | 2.5-inch small form factor (SFF) |
Condition
This drive is refurbished: a fully functioning part that comes from decommissioned production environments, overstock, returns, or off-lease equipment. The vast majority of these drives were never broken or repaired.
Core 4 tests every drive when it arrives and again before it ships, and anything that does not pass is repaired before it is sold. Because these drives have already been installed and burned in, early failures are weeded out, and Core 4 sees a lower dead-on-arrival rate than with new drives straight from the factory.
The drive is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.
You may also need
- HP 507284-001 300GB 10K DP 6G SAS DRIVE 507127-B21 575055-001 616671-001 641552-001 670823-001: Another HP 300GB 10K 6G dual-port SAS SFF drive, useful when you are expanding or matching an array built on this drive type
Datasheets and documentation
- HPE Serial Attached SCSI (SAS) Drives - HDD/SSD Model Number Matrix for Customer Reference
- 6Gb/s Serial Attached SCSI (SAS) Drives
Common questions
What does dual-port (DP) mean on this SAS drive? A dual-port SAS drive has two independent SAS ports, so it can connect to two controller paths or expanders at once. In multipath or dual-controller setups, this provides redundancy and path failover. In a standard single-controller server, the drive works normally over one port.
Will this 6Gb/s drive work with a 12Gb/s SAS controller? Yes. SAS is backward compatible, so a 12Gb/s SAS controller or backplane runs this drive at its 6Gb/s link speed.
Can I use this drive on a SATA-only controller? No. SAS drives need a SAS controller or HBA. SAS controllers can usually run SATA drives, but SATA controllers cannot run SAS drives.
What workloads suit a 10K SFF SAS drive? A 10K drive gives faster access times than 7.2K drives, so it suits boot and OS volumes, transactional databases, virtualization, and mixed server workloads. For bulk capacity storage, 7.2K LFF drives usually offer more capacity per drive.
Specifications
- Condition
- Refurbished
- Brand
- HP
- Part No.
- 507119-004
- Substitute part numbers
- 616671-001, 597609-001, 619286-001, 693569-001
- Weight
- 2.0 lb