Skip to content
Refurbished

HP 597609-001 300GB 10K 2.5in SAS 6GBPS DP HDD 616671-001 619286-001 693569-001

Brand: HP Part No.: 597609-001 Substitute part numbers: 616671-001, 619286-001, 693569-001

$10.95

In stock (2 units), ready to be shipped

Price-matching available. If you find this item for a lower price, let us know.

Our Warranty

Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.

Description

The HP 597609-001 is a 300GB, 10,000 RPM, 2.5-inch (SFF) SAS hard drive with a 6 Gb/s link, HP model number EG0300FBDBR. It is a performance-class spindle drive for HP ProLiant servers, suited to boot volumes, databases, and RAID arrays where 10K response times matter more than raw capacity. It is also listed under the alternate part numbers 616671-001, 619286-001, and 693569-001.

At a glance

  • 300GB, 10K RPM, 2.5-inch SFF
  • Dual-port SAS 6 Gb/s
  • HP model EG0300FBDBR for ProLiant servers
  • Refurbished, tested twice, 1-year advanced replacement warranty

Filling out a full array?

Need more of these drives than we have listed? Core 4 can source additional quantities of the 597609-001 and matching SAS drives for your ProLiant project. Talk to a sales engineer or call 1-855-55-CORE4.

Technical specifications

Capacity 300GB
Rotational speed 10,000 RPM (10K)
Interface SAS 6 Gb/s
Ports Dual port (DP)
Form factor 2.5-inch (SFF)
Drive type Hard disk drive (HDD)
HP model number EG0300FBDBR
Recommended firmware HPD9 or later

Compatibility

This drive model is used in HP ProLiant servers with 2.5-inch SAS drive bays. The dual-port SAS interface supports redundant paths to the drive in configurations that use them. If you are matching an existing array, the HP model number EG0300FBDBR is a quick way to confirm it against the drives already installed.

Condition

This drive is refurbished: a fully functioning part that comes from decommissioned production environments, overstock, returns, or off-lease equipment. The vast majority of these drives were never broken or repaired. Core 4 tests every part when it arrives and again before it ships, and anything that does not pass is repaired before it is sold.

Because refurbished drives have already been installed and burned in, early failures have been weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory. The drive is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.

Datasheets and documentation

Common questions

Which firmware should this drive run? HP recommends firmware HPD9 or later for the EG0300FBDBR. That release fixes an issue where the drive shows constant disk activity while it sits in hot-spare standby mode.

Can I use this drive as a hot spare? Yes. If you assign it as a hot spare, update it to firmware HPD9 or later so the activity LED does not report constant activity while the drive is in standby.

Are 616671-001, 619286-001, and 693569-001 the same drive? Yes. They are alternate HP part numbers for this same 300GB 10K 6G SAS 2.5-inch drive, so a buyer searching any of them is looking at this part.

When does a 10K SAS drive make sense over a larger 7.2K drive? A 10K drive offers lower seek and rotational latency than a 7.2K drive, which helps with boot volumes, transactional databases, and small random I/O. Choose 7.2K drives when capacity per dollar of rack space matters more than response time.

Specifications

Condition
Refurbished
Brand
HP
Part No.
597609-001
Substitute part numbers
616671-001, 619286-001, 693569-001
Weight
2.0 lb

Cart

Your cart is empty

Continue shopping