Skip to content
Refurbished

NICs & network adapters

HP 634025-001 ETHERNET 1GB 4-PORT 331FLR ADAP 629135-B21 629133-001 684208-B21 789897-001 629134-B21

Brand: HP Part No.: 634025-001 Substitute part numbers: 629135-B21, 629133-001, 684208-B21, 789897-001, 629134-B21

$10.95

In stock (3 units), ready to be shipped

Price-matching available. If you find this item for a lower price, let us know.

Our Warranty

Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.

Description

The HP 634025-001 is the Ethernet 1Gb 4-port 331FLR Adapter, a quad-port Gigabit Ethernet FlexibleLOM card built on the Broadcom BCM5719 controller. It installs in the FlexibleLOM slot of select HP ProLiant Gen8 rack servers, providing four RJ-45 copper ports without using a standard PCIe expansion slot. It is also listed under 629135-B21, 629133-001, 684208-B21, 789897-001, and 629134-B21.

At a glance

  • 4 x 1GbE RJ-45 ports, Broadcom BCM5719
  • HP FlexibleLOM form factor, PCIe 2.0 x4
  • For select HP ProLiant Gen8 rack servers
  • Refurbished and tested, 1-year advanced replacement warranty

Outfitting a rack of Gen8 servers?

If you need more 331FLR adapters than we have listed, we can source additional quantities. A Core 4 sales engineer can also help with the rest of your ProLiant parts list, from memory to drives and controllers. Talk to a sales engineer or call 1-855-55-CORE4.

Technical specifications

Ports 4 x 1GbE
Connector RJ-45
Data rate 10/100/1000 Mb/s, full duplex
Controller Broadcom BCM5719
Form factor HP FlexibleLOM (FLR)
Host interface PCI Express 2.0 x4
Cabling Category 5 or better twisted-pair
IEEE standards 802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.1Q, 802.3az, 1588, 802.1AS
Features Energy Efficient Ethernet, PXE boot, 802.1Q VLANs, auto-negotiation

Compatibility

The 331FLR is a FlexibleLOM adapter for select HP ProLiant Gen8 rack servers. FlexibleLOM is HP's swappable LAN-on-motherboard format: the card mounts in a dedicated FlexibleLOM connector on the system board, so the server's PCIe slots stay open for storage controllers, GPUs, or additional network cards.

The server needs a FlexibleLOM slot, and HPE calls for at least 2GB of server memory per adapter.

Condition

This 331FLR adapter is refurbished: a fully functioning part, tested when it reaches Core 4 and tested again before it ships.

Refurbished network adapters are a sound alternative to new. Our refurbished parts come from working production environments that were decommissioned, or from overstock, returns, and off-lease equipment, and the vast majority were never broken or repaired. Anything that does not pass testing is repaired before it is sold. Because these parts have already been installed and burned in, early failures have been weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory.

The adapter is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.

Lifecycle

The 331FLR is a FlexibleLOM adapter from the HP ProLiant Gen8 rack server generation.

Datasheets and documentation

Common questions

Does the 331FLR take up a PCIe expansion slot? No. It installs in the server's FlexibleLOM slot, a dedicated connector on the system board, leaving the standard PCIe slots free for other cards.

What cabling do the four ports need? Each port is an RJ-45 copper connection that runs over Category 5 or better twisted-pair cable and auto-negotiates 10, 100, or 1000 Mb/s.

Can the ports be teamed or used for VLANs? The adapter supports IEEE 802.3ad link aggregation and 802.1Q VLAN tagging, so ports can be combined for bandwidth or redundancy and carry multiple VLANs to the switch.

Can the server PXE boot from this adapter? Yes. The 331FLR supports PXE boot, so it can be used for network-based OS deployment and imaging.

Specifications

Condition
Refurbished
Brand
HP
Part No.
634025-001
Substitute part numbers
629135-B21, 629133-001, 684208-B21, 789897-001, 629134-B21
Weight
2.0 lb
Package dimensions
11.0" × 7.0" × 3.0"

Cart

Your cart is empty

Continue shopping