Skip to content
Refurbished

Storage

HP R0Q85B HPE MSA1060 16GB FC SFF Storage Enclosure R0Q85A P12945-001

Brand: HP Part No.: R0Q85B Substitute part numbers: R0Q85A, P12945-001

$2,695.00

In stock (7 units), ready to be shipped

Price-matching available. If you find this item for a lower price, let us know.

Our Warranty

Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.

Description

The HP R0Q85B is the HPE MSA 1060 16Gb Fibre Channel SFF storage array, a 2U block storage system with dual active/active controllers and 2.5-inch drive bays. It connects to hosts over 8 or 16 Gb Fibre Channel and suits small and midsize SAN deployments that need shared block storage. It is also listed under R0Q85A and P12945-001.

At a glance

  • HPE MSA 1060 2U SFF block storage array
  • Dual active/active controllers, 4 x 8/16 Gb FC host ports (SFPs sold separately)
  • Expands to 96 SFF drives, up to 2.95 PB raw
  • Refurbished, tested twice, 1-year advanced replacement warranty

Planning an MSA 1060 deployment?

Tell us your capacity, drive mix, and SAN setup, and a Core 4 sales engineer will quote a configured MSA 1060 with drives, SFPs, and expansion enclosures built in our lab to your requirements. Request a build quote or call 1-855-55-CORE4.

Technical specifications

Access type Block
Form factor 2U rack, SFF (2.5-inch) drives
Controllers 2, hot-swappable, active/active
Host connectivity 8/16 Gb Fibre Channel
Host ports 2 per controller, 4 per array
Expansion Up to 3 drive enclosures (LFF and/or SFF)
Maximum drives per array 96 SFF, or 24 SFF + 36 LFF (HDD or SSD)
Maximum raw capacity 737.28 TB per array enclosure; 2.95 PB per array (all SFF)
Maximum volumes and hosts 1024 volumes per array (512 per pool), 512 hosts, 1024 initiators
Power supply 584 W max output, 94% efficient, 100-240 V AC, 50-60 Hz

Compatibility

The R0Q85B is the Fibre Channel model of the HPE MSA 1060 family. It expands with up to three HPE MSA drive enclosures in any mix of LFF and SFF, for a maximum of 96 SFF drives per array.

The array ships without SFP transceivers. Each controller has two FC host ports running at 8 or 16 Gb, and one HPE MSA SFP 4-pack is required to populate the four host ports. Sister models in the same family are the R0Q86B (10GBASE-T iSCSI) and the R0Q87B (12Gb SAS).

Configuration

Core 4 stocks the components to configure the MSA 1060 and builds it in our lab to your specs and project requirements. We can supply SSDs and HDDs, Fibre Channel SFP transceivers, drive enclosures, power supplies, network cards, and more, so the array arrives ready for your SAN.

Condition

This MSA 1060 is refurbished: a fully functioning system that comes from decommissioned production environments, overstock, returns, or off-lease equipment. The vast majority of these units were never broken or repaired.

Core 4 tests every unit when it arrives and again before it ships, and anything that does not pass is repaired before it is sold. Because this hardware has already been installed and burned in, early failures are weeded out, and Core 4 sees a lower dead-on-arrival rate than with new units straight from the factory.

It is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.

Datasheets and documentation

Common questions

Does the R0Q85B include Fibre Channel SFP transceivers? No. The MSA 1060 FC model ships without SFPs. One HPE MSA SFP 4-pack (C8R24B) covers the four host ports, two on each controller.

What is the difference between R0Q85A and R0Q85B? Both are the HPE MSA 1060 16Gb FC SFF Storage. SKUs ending in B include a 94% efficient power supply that meets EU Lot9 efficiency requirements.

Can I mix LFF and SFF drives on this array? Yes, through expansion. The array enclosure takes SFF drives, and up to three LFF and/or SFF drive enclosures can be added, for up to 96 SFF drives or 24 SFF plus 36 LFF drives per array.

How many snapshots does the MSA 1060 support? 64 snapshots are included. With the HPE Advanced Data Services License, the limit rises to 512.

Specifications

Condition
Refurbished
Brand
HP
Part No.
R0Q85B
Substitute part numbers
R0Q85A, P12945-001
Weight
50.0 lb
Package dimensions
36.0" × 24.0" × 18.0"

Cart

Your cart is empty

Continue shopping