MISC SFP-10GSR-85-I FS 10G SR 850NM MMF SFP+ LC INDUSTRIAL TEMP
Brand: CORE4 Part No.: SFP-10GSR-85-I
$9.00
In stock (8 units), ready to be shipped
Price-matching available. If you find this item for a lower price, let us know.
Our Warranty
Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.
Description
The FS SFP-10GSR-85-I is a 10 Gb/s short-reach SFP+ optical transceiver that runs at 850 nm over multimode fiber with a duplex LC connector. Its industrial temperature rating suits switches, routers, and network cards in sites with wider temperature swings than a climate-controlled data center, such as outdoor cabinets, factory floors, and telecom enclosures.
At a glance
- 10 Gb/s SFP+ short-reach optic, 850 nm
- Multimode fiber, LC connector
- Industrial temperature rating
- Refurbished, with 1-year advanced replacement warranty
Outfitting a full switch or a site?
Need more than we have listed? Core 4 can source additional quantities of 10G optics, along with matching fiber patch cables and other transceivers for your project. Talk to a sales engineer or call 1-855-55-CORE4.
Technical specifications
| Form factor | SFP+ |
|---|---|
| Data rate | 10 Gb/s |
| Standard | 10GBASE-SR (short reach) |
| Wavelength | 850 nm |
| Fiber type | Multimode fiber (MMF) |
| Connector | LC |
| Temperature rating | Industrial temperature |
Compatibility
This module installs in SFP+ ports on switches, routers, and server network adapters. A link needs a matching 10GBASE-SR 850 nm optic at the far end and multimode fiber with LC connectors between them.
The SR designation means short reach over multimode fiber, the usual choice for links within a rack, a room, or a building. For longer runs or single-mode fiber plants, an LR optic is the better fit.
Condition
This transceiver is refurbished: a fully functioning part, tested when it arrives at Core 4 and tested again before it ships. Our refurbished parts come from working production environments, overstock, returns, or off-lease equipment, and the vast majority were never broken or repaired. Anything that does not pass testing is repaired before it is sold.
Because these parts have already been installed and run in service, early failures have been weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory.
It is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.
Common questions
What does the industrial temperature rating mean in practice? Industrial-temperature optics are built to operate across a wider ambient range than standard commercial-temperature modules. That makes them a good fit for outdoor enclosures, industrial switches, and other equipment without tight climate control.
Can this optic connect to a 10GBASE-LR module? No. SR optics transmit at 850 nm over multimode fiber, while LR optics use 1310 nm over single-mode fiber. Both ends of the link should be 10GBASE-SR 850 nm modules on multimode fiber.
What cable does this transceiver need? Use multimode fiber patch cables with LC connectors on both ends, typically duplex LC to LC. OM3 or OM4 multimode is the usual choice for 10G short-reach links.
Will it work in a 1G SFP port? SFP+ 10G SR optics are designed for 10 Gb/s SFP+ ports. Most 10GBASE-SR modules do not run at 1 Gb/s, so a dedicated 1G SFP optic is the safer choice for 1G ports.
Specifications
- Condition
- Refurbished
- Brand
- CORE4
- Part No.
- SFP-10GSR-85-I
- Weight
- 1.0 lb