SEAGATE ST600MM0238 600GB 10K SAS Hard Drive 2.5in
Brand: SEAGATE Part No.: ST600MM0238
$12.95
In stock (3 units), ready to be shipped
Price-matching available. If you find this item for a lower price, let us know.
Our Warranty
Core 4 Solutions provides a standard 30-day hardware warranty on parts and components and a 90-day hardware warranty on complete systems and switches, unless a different term is expressly stated on your quote, invoice, or online order confirmation. Coverage up to one year is available at no additional charge on approved purchases. Extended coverage beyond one year is available for an additional fee.
Description
The Seagate ST600MM0238 is a 600GB, 10,000 RPM SAS hard drive in the 2.5-inch small form factor. It is built for server and storage arrays that need spinning-disk performance in dense SFF drive bays, such as boot volumes, databases, and virtualization hosts.
At a glance
- 600GB capacity, 10,000 RPM
- 12Gb/s SAS interface
- 2.5-inch small form factor
- Refurbished, tested twice, 1-year advanced replacement warranty
Need more than one drive?
Filling an array or replacing a set of 10K SAS drives? We can source additional quantities and matching drives for your project. Talk to a sales engineer or call 1-855-55-CORE4.
Technical specifications
| Capacity | 600GB |
|---|---|
| Spindle speed | 10,000 RPM (10K) |
| Interface | SAS 12Gb/s |
| Form factor | 2.5-inch (SFF) |
Compatibility
The ST600MM0238 fits 2.5-inch SAS drive bays connected to a SAS controller or HBA. It runs at 12Gb/s on 12Gb/s SAS controllers and also works on 6Gb/s SAS controllers at the lower link speed.
Servers and arrays usually mount drives in a vendor-specific tray or carrier, so plan for the carrier your chassis uses.
Condition
This drive is refurbished: a fully functioning part that Core 4 tests when it arrives and again before it ships.
Our refurbished parts come from working production environments that were decommissioned, or from overstock, returns, and off-lease equipment. The vast majority were never broken or repaired, and anything that does not pass testing is repaired before it is sold. Because these drives have already been installed and burned in, early failures are weeded out, and Core 4 sees a lower dead-on-arrival rate than with new parts straight from the factory.
The drive is covered by Core 4's 1-year advanced replacement warranty: if it fails within a year, a replacement ships right away, before the failed unit comes back.
Common questions
Will a 12Gb/s SAS drive work on a 6Gb/s SAS controller? Yes. SAS is backward compatible, so the ST600MM0238 negotiates down and runs at 6Gb/s on an older controller or backplane.
Can this drive be used on a SATA-only controller? No. SAS drives need a SAS controller or HBA. A SAS controller can run SATA drives, but a SATA controller cannot run SAS drives.
What workloads suit a 10K SAS drive? 10K RPM SAS drives give faster random access than 7.2K nearline drives, which suits boot volumes, transactional databases, and virtual machine storage where SSD cost per GB is not justified.
Specifications
- Condition
- Refurbished
- Brand
- SEAGATE
- Part No.
- ST600MM0238
- Weight
- 2.0 lb